Checklist After Finishing The Site Plan

1) The Proposed Alignment including curve portion has to be in ‘Continuous Red Line’ with a line weight of 0.3mm.
2) The Alternative Alignment including curve portion has to be in ‘Dashed Red Line’ with a line weight of 0.3mm and with a line type scale of 5.
3) The Tangents of the curves are to be in ‘Dashed Black Line’ with a line weight of 0.3mm and with a line type scale of 5.
4) The chainage at 25m intervals including beginning & ending chainages are to be shown in ‘Green Color’ with a text height of 2.5mm and ‘Arial’ font, perpendicular to the alignment. Ex: - ‘Km 0.000’.
5) The chainage of each IP has to be shown in ‘Green Color’ with a text height of 2.5mm and ‘Arial’ font, perpendicular to the alignment. Ex: - ‘IP2 @ Km 0.255’.
6) The chainages of TP1 & TP2 are to be shown in ‘Black color’ with a text height of 2.0mm and ‘Simplex’ font, perpendicular to the alignment. Ex: - ‘TP1 @ Km 0.215’.
7) The North arrow is to be shown in proper direction with 2cm edge to edge.
8) The Title of the site plan is to be shown below the site plan in ‘Red’ with a text height of 3.0mm and ‘Arial’ font.
Ex: - ‘SITE PLAN FROM KM 0.000 TO KM 1.000’.
9) The survey number text has to have a rotation angle of 0 degrees with a text height of 2.0mm.
10) The cross-sectional levels placed along the alignment are to be shown in ‘Red color’ with a height of 2.0mm and ‘Simplex’ font.
11) The contour labels are to be shown in ‘Magenta color’ with a text height of 2.5mm and ‘Simplex’ font.
12) The alternative contour lines are to be shown in ‘Color 34’ and ‘Color 41’.
13) The village map has to be checked with the checklist prepared for ‘Digitization of Village Map’.